The Semyx Cutting Solution 5-axis head takes the tilting head a step beyond and cuts beveled and 3D parts with a 60 degree angle. Our 5-axis head gives you the ability to cut parts even faster with more accuracy than ever.

• Beveling angle (B Axis): 0° to 60°
• C-Axis rotation Angle: Unlimited (infinite)
• Angular accuracy: ≤ 30 Arcminutes
• C Axis maximum RPM: 17 RPM
• Weight: 40 kg
• Accuracy at the tool center point TCP: ± 0.25 mm
• Abrasive Swivel Joint: Unlimited (infinite)
• Electronic resolution: 0.9′

Addition of the tilting cutting head may reduce the working envelope

The Semyx Cutting Solution tilting head allows the cutting head to cut at different angles. This eliminates the tapered cutting on higher quality cutting. The easy to use Semyx Cutting Solution tilting head positions the tilting point at the material. Programmable tilt up to ±12° maximum tilt angle with the capability to change angles rapidly for increased cutting speed.

The auto-height and anti-collision system automatically adjusts the cutting head at the proper height to cut at a fixed distance. At the same time, it also prevents damage to the tip of the cutting head by preventing collision. This system helps reduce wear and tear and results in less monitoring time.

Dual cutting heads is an essential option for operations looking to cut a large quantity of relatively small items at a faster rate.

The two cuttings are mounted on one Z-axis and the distance between the cutting heads can be manually adjusted.

The dual Z-axis is similar to the dual cutting heads in allowing to cut larger quantity of relatively small items at a fast rate, however, the dual Z-axis provides room for flexibility.

The two cutting heads are mounted on separately independent Z-axis allowing for the use of one cutting head while parking the other and for widening the distance between the two heads.

The platform can flip, ensuring the safe and convenient loading and unloading of fragile material like glass, marble, etc. onto and off of the cutting table, greatly reducing the incidence of accidental material damage and the labor, and so increasing the working efficiency.

The arm slats and machine table slats are provided with rubber to absorb shock and cutting force which may cause damage to brittle materials.

This option can be easily mounted on the O-Series.

Our laser edge finder, which slides over the focusing tube, allows the machine operators to rapidly establish exact location points, edges, centers of material, and centers of holes of pieces being cut on their Semyx Cutting Solutions’ table.

Semyx Cutting Solutions introduces the GRS abrasive removal system which is designed to continuously remove exhausted abrasive that collects in the waterjet catch tank, thus eliminating downtime for cleanout and maximizes production. The GRS abrasive removal system can be adapted to any abrasive waterjet cutting machine. The selection of a GRS abrasive removal system is based on the square footage of the waterjet catch tank and number of cutting heads.

The engineers designed a custom fit sweeper package to move large quantities of abrasive laden along the bottom of the tank, toward the suction. Thus, maximizing your productivity and eliminating down time for tank cleaning. Using the abrasive removal along with a closed loop filtration system will result in a substantial reduction in consumable costs.

The Semyx Cutting Solution closed loop filtration system is designed for waterjet tables to filter and treat the overflow water for reuse.  This system can service single or multiple heads on any Waterjet table.

By using our closed loop system, you will eliminate the need to go to drain by recycling the water, reduce your water consumption, your costs for treated water such as RO units or water softeners, the machines maintenance and maximize the performance but most importantly, our closed loop system protects your high pressure pump by always supplying the manufactures specified water quality.

The CLS-RO-O3-T system is used to lower the operating costs of the Closed Loop System in applications where make-up water quality is poor. Reverse Osmosis Systems are typically recommended when make up water is greater than 250 ppm total dissolved solid. The CLS-RO system is comprised of three main components.

Our chillers are designed to cool the OEM’s high pressure pumps as well as the Closed Loop Filtration system, providing cooled DI treated water for cutting purposes to maximize high pressure pump seal life. We offer various models such as Closed Loop Chillers, In-Line Chillers and Flow-Thru Chillers, to work with all waterjet manufactures high pressure pumps.

The remote control consists of a transmitter and receiver. Innovative positioning of buttons allows intuitive and easy one-hand operation. Advanced battery technology allows full charge in 15 min. and run time of 30 hours. Robust performance and safety compliance promote easy maintenance with remote diagnostics capabilities to reduce downtime.

Accelerated water level control for reduced noise and splash caused by the jet allowing for a quieter and cleaner work area. Also, on the abrasive waterjet cut, the submerged cutting allows for a cleaner cut that maintains a slightly better cutting quality. The use of an analog measuring device maintains the level of cutting without the need to adjust the overflow each time the water level changes.